Reliable Condition Used Printing Equipment Used Offset Printing Press High Performance

We supply a wide range of used printing equipment and post-press supporting equipment for a long time, covering full-series models such as offset printing presses, digital printing presses, flexo printing presses, gravure printing presses, die-cutting machines, laminating machines, hot stamping machines, box gluing machines, folding machines and book binding machines. All equipment comes from regular manufacturers and formal channels, and has undergone professional disassembly, cleaning, testing, debugging, refurbishment and trial operation to ensure normal operation, stable performance and good appearance, which can be directly put into production on the machine. Suitable for various printing enterprises engaged in packaging printing, book and periodical printing, label printing, carton printing, advertising graphics, etc., it is especially suitable for small and medium-sized printing factories, start-up enterprises and those in need of  production expansion and upgrading, realizing efficient production with lower investment, greatly reducing the initial investment cost and achieving faster cost recovery.

Core Product Features

1. High Cost Performance, Low Investment Cost:

Under the same production capacity, the price is only 30%–70% of that of new machines, greatly reducing the initial investment and easing financial pressure.
2. In-Stock and Ready to Use, Short Production Cycle:

 After professional maintenance and debugging, it can be put into production quickly after delivery and installation, without waiting for the production and scheduling of new machines.
3.Complete Models, Wide Selection Range:

From single-color, two-color, four-color, five-color to multi-color units, from small format to full-sheet large format, one-stop procurement of offset printing and post-press equipment is available.
4.Performance Proven by the Market:

Mainstream brand models are mature and stable, with low failure rate, easy access to accessories and convenient maintenance, which is more worry-free than new models.
5.Professional Refurbishment, Reliable Condition:

 High-quality used equipment will be refurbished by replacing wearing parts, correcting pressure, cleaning oil circuits and calibrating overprinting, achieving a use effect close to that of new machines.
6.Low Depreciation Rate, Flexible Resale:

The price of used equipment is relatively stable, with small loss when resold after several years of use, and lower investment risk.

How to choose:

1.Clarify Your Own Needs:

Select corresponding models according to products (packaging/books and periodicals/labels), format, number of color groups and production capacity, and do not blindly pursue high configuration.
2.Prioritize Mature Big Brands:

Such as Heidelberg, Komori, KBA, Roland, Mitsubishi, etc., which are durable, easy to find accessories and familiar to maintenance masters.
3.Check the Production Year and Service Time:

The closer the production year and the less working hours, the better the equipment condition; avoid purchasing machines that have been in service for too long or have been idle and damp for a long time.
4.On-Site Trial Operation, Key Inspections:
  - Printing overprint precision, whether there is ghosting, ink bars or paper feeding skew
  - Operation of feeder, delivery, clutch pressure, dampening rollers and ink rollers
  - Whether gears, bearings and guide rails are severely worn
  - Whether the circuit, air circuit and oil circuit are normal
5.Understand Maintenance History and Condition:

 Machines with regular maintenance have a low failure rate; for equipment that has undergone major repairs, the maintenance quality must be confirmed.
6.Confirm Accessories and After-Sales Service:

Prioritize merchants that can provide installation, debugging, training and short-term warranty for more guaranteed later service.
7.Balance Budget and Cost Performance:

Do not covet ultra-low-priced problematic machines, nor blindly buy high-priced almost new machines; choose the most suitable appearance and configuration according to production volume.

How to use:

1.Installation and Positioning: Fix the equipment horizontally, connect power and air, check oil-water separation, and ensure stable voltage.
2.Comprehensive Inspection Before Startup: Add oil to lubrication points, check chains, belts and gears, and clean the feeder and paper channel.
3.No-Load Test Run: First run at low speed without load, listen for abnormal noise and vibration, and observe whether the air circuit and clutch pressure are normal.
4.Formal Printing Debugging: First adjust the paper feeding to be smooth, then adjust the ink-water balance and overprint precision, and gradually increase the speed.
5.Standard Daily Maintenance:
  - Clean ink, paper scraps and spray powder every day
  - Regularly add lubricating oil, replace hydraulic oil and engine oil
  - Keep the workshop dry and dust-proof to avoid circuit dampness
6.Use Reasonably, Avoid Overload: Do not run at high speed for a long time, and do not print paper beyond the machine specifications to extend the service life.
7.Handle Small Faults in Time: Repair small problems such as abnormal noise, overprint drift and unstable paper feeding in time to avoid expanding into major faults.

Q1. Are used printing presses reliable? Will they break down frequently?
Used models from formal channels and professional maintenance are very reliable. Mature models of big brands have a low failure rate, and can be used stably for many years as long as they are well maintained. Machines with low-price refurbishment and hidden faults have relatively high risks.
Q2. How to judge whether the machine has hidden faults?
 1.Print dozens of sheets to check overprint, dots, whether there are ink bars and ghosting
 2.Test high-speed paper feeding to see if the feeder is not smooth or paper jams occur
 3.Check whether gears and bushings are worn with large gaps
 4.Check whether the circuit is messy and whether there are maintenance traces. It is best to bring a professional maintenance master for on-site inspection.
Q3. Is there a warranty for used equipment?
Regular merchants generally provide 1–3 months of on-installation warranty, and wearing parts are not covered by the warranty. Personal transfers usually have no after-sales service, so be sure to conduct a thorough trial operation before purchase.
Q4. How to calculate the freight and installation cost of used printing presses?
Generally, the buyer bears the freight, and some merchants can provide installation, debugging and training. Large-scale equipment requires professional disassembly, hoisting and transportation to avoid collision and damage.
Q5. What scams should I pay attention to when buying used equipment?
  - Attract with ultra-low prices, not allowing trial operation or on-site viewing
  - Concealing major faults, covering up wear and tear through refurbishment
  - False brand and false production year. Suggestion: View and test the machine on site, sign a contract and keep certificates.
Q6. Are accessories for old machines easy to buy?
Accessories for mainstream brands (Heidelberg, Komori, etc.) are very common and can be bought anywhere in China; accessories for unpopular old models may be difficult to find, so try to avoid them when purchasing.

Q7. Can used equipment be exported?
Yes, it can be exported. Most merchants can provide packing, fumigation, customs declaration and logistics services, suitable for procurement by overseas printing factories.